Baroque Church of San Lorenzo
For project 002, I decided to draw a new plan.
A spline forming the inner-most oval connects the edges of 4 circumscribing circles. Those circles move up and down and scale according to an animated wheel.
The oculus is centered on the average of the 4 endpoints on the circles.
Construction lines are drawn from the midpoint to midpoint of the lines arraying outward from the oculus. A point is placed at the midpoint of that line, which will serve as the center of a circle that will split the surface above.
The area of the trimming circle is based on the area of the surface directly above it. It is divided by a length (found in the parameters diagram below) to adjust it to the appropriate unit and scale.
The height of each arched bay is related to the distance between each rib, which is first divided by a certain parameter (shown in the parameters diagram below).
Parameters
Rotate: 60 degrees, Length Divider = 2
Rotate: 90 degrees, Length Divider = 1
Rotate: 120 degrees, Length Divider = -1
Rotate: 150 degrees, Length Divider = -2
Rotate: 180 degrees, Length Divider = 100
No comments:
Post a Comment